KJS series mine pneumatic wet dust suppressor

KJS series mine pneumatic wet dust remover is designed to remove dust from gas discharge drilling holes, roadway shotcrete, driving roadway and other places. The dust remover is placed next to the drilling rig and shotcrete mixer, the body of the roadheader, the second transportation belt, or the place designated by customers. 
  • Brand:

  • Item NO.:

  • Goods Stock:


1. Overview

The dust suppressor design is suitable for dust reduction in gas discharge boreholes, roadway shotcrete, excavation roadway, coal mining face, belt roadway, return air roadway, etc. The dust suppressor does not require electricity, and uses the static pressure water and compressed air in the well to drive the impeller to form negative pressure or fog cannons to reduce dust at the dust point, and passes through all regions of the country.

the underground high-pressure water pipe is inserted at the water inlet of the filter, and the water outlet of the filter is connected to the water inlet joint of the dust remover through high-pressure rubber hose, The compressed air is connected to the air inlet. Open the high-pressure water valve and air pressure valve, and the equipment operates.

The use of coal mines, the dust reduction effect can obviously better protect the health of workers near the dust source.

2. Product advantages

1)It is suitable for dust reduction in harsh environments such as underground fully mechanized mining face, tunneling face, belt conveyor transfer point and so on.

2)The dust collector does not need power supply, and only relies on static pressure water or static pressure water to drive the fan to achieve the functions of dust reduction and dust removal; the production is safer and the energy saving effect is obvious.

3)The dust collector is small in size, light in weight, easy to move and install, greatly reduces workload and improves work efficiency.

4)It has a wide range of applications, does not need to be connected to electricity, and improves the safety of mine production.

3. Technical parameters

Related Products
spray dust suppression blower
FJP series mine spray dust suppression blower
FJP series of mine spray dust suppression blower (formerly JPK-3 mine hydrodynamic spray dust collector) is used for dust removal in belt roadway, return roadway and coal face.
Mine Dust Fan
FJP Series Dust Removal Spray Fans For Mining
The FJP series of mine spray dust suppression fans are used for dust removal in belt lanes, wind return lanes, and coal mining faces. The dust remover shall be placed on the top of the belt roadway, return air roadway, the rocker arm or body of the shearer or at the place designated by Party A. the underground high-pressure water pipe shall be inserted at the filter inlet, and the filter outlet shall be connected to the water inlet joint of the dust remover through the high-pressure rubber pipe, and the high-pressure water valve equipment shall be opened for operation.
Mine Dust Fan
FQ Series Mining Pneumatic Press in Axial Flow Local Fan
The working time of underground coal bunker, water bunker, equipment chamber and other works in the coal mine is short. If the electric fan is used to connect the power and arrange the fan, it is very troublesome, time-consuming and labor-consuming. According to this situation, the company has developed FQ series mine pneumatic press in axial flow local fan, which is suitable for short-distance air supply during coal bunker, water bunker maintenance and roadway excavation.
Mine Dust Fan
Mine Hydrodynamic Automatic Dust Reduction System
The mine hydrodynamic automatic dust reduction system is mainly composed of hydrodynamic dust remover, automatic sprinkler dust reduction device, main control box, touch sensor, heat release sensor, equipment start and stop sensor and other equipment. The system is programmable, easy to install, energy saving, consumption reduction and high dust reduction efficiency. It can automatically judge the pedestrian, driving and surrounding environment according to the roadway and environmental dust source, and automatically start and stop the dust remover to realize automatic dust reduction.
Electrical Equipment
Box-Type Fixed High-Voltage Switchgear
It is suitable for the three-phase AC 50 Hz, rated voltage of 3.3, 7.2, 12 KV indoor high-voltage power distribution equipment. Widely used in industrial and civil cable ring network and terminal power supply.
lighting integrated protection device
Mining Explosion Proof Intrinsically Safe Lighting Transformer Protection Device
ZJZ-16/1140(660)SM-2 This device is suitable for underground coal mine containing coal dust and explosive gas (methane). It can control the power supply of 127V grade lighting signal equipment, and the power supply is introduced as 50 Hz 1140V or 660V.
Mining Explosion Proof Starter
Mining Explosion-Proof Intrinsically Safe Intelligent Vacuum Electromagnetic Starter
The device is used in coal mines containing explosive gas (methane) and coal dust. It is suitable for the circuit of AC 50Hz, voltage 660V or 1140V, ungrounded three-phase center. To local control or remote control the start and stop of three-phase asynchronous motor, and can be reversed at the stop.
Mining Distribution device
Mining explosion - proof permanent magnet mechanism high voltage vacuum power distribution device
The product is mainly applicable in the coal mine with explosive gas (methane mixture), to control, protect and measure in the three-phase AC neutral point not directly grounded power supply system of rated voltage 10KV, 6KV, rated frequency 50Hz.
We are committed to providing safe, energy-saving, efficient products and system solutions for intelligent mines.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.