This product is suitable for an environment with coal mine gas, coal dust, and other explosive gases underground, to logically control the start, stop and double-speed of the three-phase AC asynchronous motor or AC double-winding motor in the circuit of AV 1140V or 660V. And it has a joint control function.

This product is suitable for an environment with coal mine gas, coal dust, and other explosive gases underground, to logically control the start, stop and double-speed of the three-phase AC asynchronous motor or AC double-winding motor in the circuit of AV 1140V or 660V. And it has a joint control function.

This product is suitable for an environment with coal mine gas, coal dust, and other explosive gases underground, to logically control the start, stop and double-speed of the three-phase AC asynchronous motor or AC double-winding motor in the circuit of AV 1140V or 660V. And it has a joint control function.

The device is used in coal mines containing explosive gas (methane) and coal dust. It is suitable for the circuit of AC 50Hz, voltage 1140V or 660V, ungrounded three- phase center. To control the forward and reverse rotating of three-phase asynchronous motor.

This soft starter is suitable for coal mines containing explosive gas (methane) and coal dust. In AC 50Hz, voltage 1140V or 660V, neutral point ungrounded power supply system, perform various forms of soft starting (such as current limit, voltage ramp and power torque ramp for three-phase squirrel cage motors with currents below 200A and 400A) ) . It also has perfect protection function and fault display function, which greatly reduces the troubleshooting time.

This product is suitable for an environment with coal mine gas, coal dust, and other explosive gases underground, to logically control the start, stop and double-speed of the three-phase AC asynchronous motor or AC double-winding motor in the circuit of AV 1140V or 660V. And it has a joint control function.

This product is suitable for an environment with coal mine gas, coal dust, and other explosive gases underground, to logically control the start, stop and double-speed of the three-phase AC asynchronous motor or AC double-winding motor in the circuit of AV 1140V or 660V. And it has a joint control function.

High-voltage soft starter is suitable for mines containing explosive gas (methane) and coal dust. In the AC 50Hz voltage of 10kV or 6kV lines, the control methods can be local control, remote control, network control and other control methods, used for high-power motors soft start and soft stop.

It is suitable for the mine with explosive dangerous gas and coal dust. It can control and protect the start and stop of less than 4 three-phase squirrel cage asynchronous motors in the AC 50 Hz and rated voltage ac1140v (660V), and the phase sequence can be changed when stopping. It is especially suitable for the centralized monitoring of mining, transportation, coal mining and other dynamic loads.

High-voltage soft starter is suitable for mines containing explosive gas (methane) and coal dust. In the AC 50Hz voltage of 10kV or 6kV lines, the control methods can be local control, remote control, network control and other control methods, used for high-power motors soft start and soft stop.

High-voltage soft starter is suitable for mines containing explosive gas (methane) and coal dust. In the AC 50Hz voltage of 10kV or 6kV lines, the control methods can be local control, remote control, network control and other control methods, used for high-power motors soft start and soft stop.

The soft starter is suitable for coal mines containing explosive gas (methane) and coal dust.In an AC 50Hz, voltage 1140V or 660V, neutral ungrounded power supply system, various forms of soft start (such as current clipping, voltage ramp and power torque ramp) are performed on three-phase squirrel-cage motors with currents up to 200A and 400A.The controller also has the perfect protection function and the fault display function, greatly reduces the time of troubleshooting.